Unit production cost is the number that decides whether an injection blow molding (IBM) program is profitable. Procurement and operations leaders need more than a machine price; they need a defensible cost per plastic bottle that survives a finance review. This article dissects the full per-bottle cost stack for IBM, from polymer resin and colorant through energy, labor, mold amortization, scrap, packaging, and indirect overhead. Using Aibim’s IBM55 Hybrid, IBM65, and IBM75 three-station machines as the reference platform, it gives concrete figures for bottle weight, cavity count, kWh per kg, scrap percentage, and utilization, then lays out a cost-comparison table across weight and output tiers and a checklist of reduction levers. By the end you can estimate your own unit cost to within a realistic band and avoid the miscalculations that quietly destroy margin.
Aibim is a Wanplas factory with 12-plus years in one-step hollow molding, serving pharmaceutical, food, drink, and cosmetic bottle markets with bottles from 3 ml to 1000 ml. The methodology here applies equally to competitor IBM platforms from Jomar, Bekum, Aoki, Milacron, and Sumitomo, because the cost structure of the process is shared even when the invoice differs.
Unit cost matters most at the quoting stage, where an error of even 0.005 USD per bottle compounds into tens of thousands of dollars across a multi-million-unit annual program. A molder who undercosts loses margin silently; one who overcosts loses the order to a competitor with a tighter, equally valid model. The goal of this guide is to give you a defensible number, not a hopeful one, by making every assumption explicit and every line item attributable to a physical input. Treat the tables as starting points to be overwritten with your own resin contract, electricity tariff, wage rate, and cavity plan, and the result will survive both a customer audit and an internal finance review. Throughout, the structural advantages of injection blow molding, the elimination of trimming and the inherently low scrap rate, are credited where they belong so the comparison against extrusion blow molding stays honest.
단일 병 비용 분석
사출 블로우 성형 병의 단위 비용은 출하 가능한 양품 병 하나를 만드는 데 소비된 모든 자원의 합입니다. 이를 모델링하는 가장 깔끔한 방법은 각각 양품 병당 USD로 표시된 가산적 구성 요소의 스택으로 보는 것입니다.
양품 병만이 수익을 창출하는 유일한 단위이므로 모든 비용은 총 샷 수가 아닌 양품 출력으로 나누어야 합니다. 이 한 가지 원칙이 정확한 모델과 낙관적인 모델을 구분합니다. 스크랩, 시동 폐기물 및 전환 손실을 분모에 포함시키기 때문입니다.
The standard cost stack, in order of magnitude, is: resin and colorant, energy, direct labor, mold amortization, machine depreciation, maintenance and spares, scrap premium, packaging, logistics, and indirect overhead. Resin is almost always the largest line, typically 55 percent to 70 percent of total unit cost for a small bottle, while energy and labor together are often under 15 percent. That ranking tells you where to focus: you control margin most by managing material and scrap, and you protect it with process efficiency.
수지 및 착색제: 지배적인 변수
수지 비용은 병 중량에 kg당 수지 가격을 곱한 값에 착색제 또는 첨가제 부하를 더한 것과 같습니다. IBM은 네트 셰이프, 플래시 없는 공정이므로 구매한 수지는 거의 정확히 병에 들어 있는 수지이며, 시작 및 게이트 낭비만 최소화됩니다.
| Material | Typical Price Band | Best IBM Use |
|---|---|---|
| PP (homopolymer) | 1.10 to 1.40 USD per kg | Pharma, cosmetics, food |
| HDPE | 1.00 to 1.30 USD per kg | Pharma, personal care |
| PS / SAN | 1.20 to 1.60 USD per kg | Clear cosmetic, diagnostic |
| PCR / medical grade | 1.50 to 2.20 USD per kg | Regulated pharma, EU 10/2011, FDA |
| Colorant / masterbatch | 3 to 8 USD per kg of additive | 1 to 4 percent let-down |
For a 12 g PP bottle at 1.25 USD per kg, resin alone is 0.0150 USD. A 2 percent white masterbatch at 4.00 USD per kg adds 0.0010 USD, bringing material to 0.0160 USD. The cost scales almost linearly with bottle weight: a 5 g bottle costs about 0.0067 USD in resin, a 30 g bottle about 0.0375 USD. The practical implication is that lightweighting a bottle by even 10 percent cuts the largest cost line by 10 percent with no change to the machine.
병당 에너지 소비량
Energy in IBM covers the injection press, the blow station, the chiller, the material loader, and compressed air. Measured at the line boundary, total specific energy lands at 0.35 to 0.55 kWh per kg of plastic processed for a conventional hydraulic IBM, and Aibim’s PREFILL technology with variable displacement pumps reduces that by a minimum of 35 percent, pushing the efficient band toward 0.30 to 0.40 kWh per kg.
| Bottle Weight | Energy per kg | kWh per Bottle | Cost at 0.12 USD per kWh |
|---|---|---|---|
| 5 g | 0.40 kWh | 0.0020 | 0.00024 USD |
| 12 g | 0.40 kWh | 0.0048 | 0.00058 USD |
| 30 g | 0.40 kWh | 0.0120 | 0.00144 USD |
Energy is a small but steady cost. At 0.12 USD per kWh, even a 30 g bottle carries only about 0.0014 USD of energy, so the absolute saving from efficiency is modest per bottle but meaningful across hundreds of millions of units per year. The bigger value of Aibim’s energy design is heat reduction and stability on three-shift lines, which protects cycle time and utilization, the variables that actually decide unit cost.
인건비 및 직접 간접비
IBM은 직접 노동이 적은 공정입니다. 한 명의 훈련된 운영자가 1~2대의 기계를 감독할 수 있으며, 트리밍 또는 디플래싱 스테이션이 없어 압출 블로우 성형이 요구하는 전체 노동 단계가 제거됩니다. 병당 직접 노동 비용은 거의 전적으로 교대 패턴과 출력량에 따라 달라집니다.
| Shift Pattern | Annual Output | Loaded Labor Cost | Labor per Bottle |
|---|---|---|---|
| 1 shift | 4 to 7 million | 35,000 to 45,000 USD | 0.006 to 0.011 USD |
| 2 shift | 14 to 22 million | 70,000 to 90,000 USD | 0.003 to 0.006 USD |
| 3 shift | 40 to 57 million | 105,000 to 135,000 USD | 0.002 to 0.003 USD |
Direct overhead such as supervision, quality inspection, and line utilities typically adds another 0.001 to 0.003 USD per bottle at volume. The pattern is clear: labor falls sharply per bottle as you add shifts, which is why a two-shift or three-shift IBM line is dramatically cheaper per unit than a single-shift line running the same machine.
캐비티 수에 따른 금형 상각
IBM 금형은 비용이 대략 캐비티 수에 비례하는 정밀 3피스 금형입니다. 금형 비용을 양품 병 수로 상각하면 자본 지출이 생산량이 증가함에 따라 줄어드는 미미한 개당 수치로 바뀝니다.
| Cavities | Mold Investment | Shot Life | Amortization per Bottle |
|---|---|---|---|
| 4 | USD 12,000 | 10 million | 0.00120 USD |
| 8 | USD 22,000 | 12 million | 0.00183 USD |
| 12 | USD 38,000 | 15 million | 0.00253 USD |
| 16 | USD 52,000 | 18 million | 0.00289 USD |
Although a 16-cavity mold costs more than four times a 4-cavity mold, its per-bottle amortization is only about 2.4 times higher because its shot life is longer. More importantly, higher cavitation raises output per cycle, which lowers every other fixed cost line. Mold amortization is therefore a lever that improves with volume, not a penalty, provided you actually run the cavities you paid for.
스크랩률 및 숨은 배수 효과
Scrap is the silent cost multiplier in IBM. Because cost is divided by good bottles, every rejected unit forces the material, energy, and labor of good units to absorb the loss. IBM’s net-shape process keeps scrap low, typically 1 percent to 3 percent, versus 4 percent to 8 percent for extrusion blow molding, but the discipline of counting it correctly matters.
| Scrap Rate | Extra Material per Good Bottle | Total Cost Premium |
|---|---|---|
| 1 percent | 1.0 percent | 1.0 to 1.5 percent |
| 3 percent | 3.1 percent | 3.0 to 4.5 percent |
| 7 percent | 7.5 percent | 7.5 to 10.0 percent |
A scrap rate that drifts from 2 percent to 7 percent can add 5 percent to 9 percent to total unit cost before anyone notices, because the loss hides inside the good-bottle denominator. Aibim’s CE-certified stripper station with long-distance digital laser sensors and light curtain protection reduces jam-related scrap, and SD-card parameter storage lets you reload a proven process recipe across machines, cutting start-up waste during changeovers. Tight scrap control is one of the cheapest, highest-impact cost levers available.
포장, 물류 및 간접비
마지막 비용 계층은 병이 기계를 떠난 후에 나타납니다. 이는 종종 단순한 모델에서 제외되며 정확히 예산이 무너지는 지점입니다.
포장
Small bottles are typically packed in PET or PE bags inside corrugated cartons, or in reusable totes for cleanroom pharma flows. Packaging ranges from 0.0010 to 0.0040 USD per bottle depending on whether the line uses bulk gaylord packing or individual cartons, and whether cleanroom requirements force single-use films.
물류
Outbound freight depends on bottle density and distance. Nested empty bottles are voluminous, so freight can reach 0.002 to 0.008 USD per bottle to a regional filler and more to intercontinental destinations. In-house filling eliminates this line entirely, which is why many IBM operators integrate downstream filling.
간접 간접비
Factory rent, utilities beyond the line, QA labs, management, and administrative cost typically add 0.002 to 0.005 USD per bottle at volume. The Wanplas brand, as Aibim’s parent, carries shared service promises including a 500 USD-value free spare parts allowance per year and a quality guarantee, which cap a portion of indirect maintenance cost and improve cost predictability.
The interaction between packaging, logistics, and overhead is often where small-bottle programs lose control of unit cost, because these lines are billed per case or per pallet rather than per bottle and are easy to undercount. A useful discipline is to convert every case and pallet charge back to a per-bottle figure during the model build, exactly as the comparison table does, so that a freight surcharge or a switch from bulk to carton packing shows up immediately as a movement in total unit cost. Captive operations that fill in-house eliminate outbound bottle logistics entirely but pick up filling-line overhead instead; the two should be modeled side by side rather than assumed away. For contract molders serving multiple fillers, building a per-destination logistics matrix prevents a single expensive lane from distorting the blended unit cost used for quoting.
병 중량 및 생산량 등급별 비용 비교
아래 표는 Aibim IBM 라인의 대표 구성에 대한 총 단위 비용으로 스택을 통합합니다. 모든 수치는 양품 병당 USD이며, 달리 명시되지 않는 한 지수 연동 수지, 80% 가동률 및 2교대 패턴을 가정합니다.
| Configuration | Bottle Weight | Annual Output | Resin plus Color | Energy plus Labor | Mold plus Depr. | Pkg plus OH | Total Unit Cost |
|---|---|---|---|---|---|---|---|
| IBM55, 6 cav, 1 shift | 5 g | 5.0 million | 0.0071 USD | 0.0080 USD | 0.0040 USD | 0.0050 USD | 0.0241 USD |
| IBM65, 8 cav, 2 shift | 12 g | 20.2 million | 0.0160 USD | 0.0040 USD | 0.0030 USD | 0.0040 USD | 0.0270 USD |
| IBM75, 12 cav, 2 shift | 12 g | 30.2 million | 0.0160 USD | 0.0030 USD | 0.0035 USD | 0.0035 USD | 0.0260 USD |
| IBM75, 12 cav, 3 shift | 30 g | 45.0 million | 0.0385 USD | 0.0035 USD | 0.0030 USD | 0.0055 USD | 0.0505 USD |
| IBM65, 8 cav, 1 shift | 12 g | 10.1 million | 0.0160 USD | 0.0090 USD | 0.0040 USD | 0.0060 USD | 0.0350 USD |
Two insights stand out. First, the 12 g bottle is cheaper per unit at higher cavitation and more shifts (0.0260 USD) than at single shift (0.0350 USD), purely from fixed-cost dilution. Second, resin dominates every row, confirming that material strategy and scrap control outweigh machine-selection fine points for total cost.
비용 절감 수단 체크리스트
이 체크리스트를 사용하여 모든 Aibim IBM 라인에서 단위 비용을 낮추십시오.
- 벽 두께와 바닥 최적화를 통해 병을 5~15% 경량화하십시오. 가장 큰 비용 항목인 수지를 비례적으로 절감합니다.
- 지수 연동 계약으로 수지를 협상하고 물량 구간으로 구매하십시오. kg당 0.05 USD만 절감해도 12g 병에서 0.0006 USD를 절약합니다.
- 색상이 허용되는 곳에서 마스터배치 첨가 비율을 3%에서 1.5%로 줄이십시오. 착색제 비용이 절반으로 줄어듭니다.
- 캐비테이션을 8, 12 또는 16캐비티로 최대화하여 병당 몰드 비용과 감가상각을 분산하세요.
- 인건비와 간접비를 더 많은 단위에 분산하기 위해 2~3교대로 가동하십시오. 단일 교대는 병당 가장 비싼 방식입니다.
- SD 카드에 저장된 공정 레시피와 걸림을 방지하는 CE 인증 스트리퍼 감지로 스크랩을 2% 미만으로 줄이십시오.
- Aibim 기계에 PREFILL 유압을 채택하여 기존 IBM 대비 최소 35%의 에너지를 절감하십시오.
- 가능한 경우 후공정 충전을 통합하여 병 출하 물류를 제거하세요.
- 사내 또는 지역 물류에는 일회용 카톤 대신 재사용 가능한 토트를 사용하세요.
- 유효 단위 비용을 높이는 계획 외 가동 중단을 피하기 위해 Wanplas 연간 500 USD 예비 부품 할당액과 예방 유지보수를 적용하십시오.
일반적인 비용 계산 오류 함정
대부분의 잘못된 IBM 비용 견적은 동일한 예측 가능한 방식으로 실패합니다. 이를 피하십시오.
함정 1: 양품 병이 아닌 총 샷 수로 나누기
명판 생산량 대신 양품 생산량을 사용하지 않으면 스크랩률만큼 비용이 과소평가됩니다. 항상 양품 병으로 나누고, 스크랩 가정에 시동 및 교체 폐기물을 포함하십시오.
함정 2: EBM 비교에서 트리밍 단계 무시
압출 블로우 성형과 벤치마킹할 때, 단순한 모델은 디플래시 스테이션의 인력과 장비를 누락합니다. IBM의 무트리밍 이점을 반영해야 하며, 그렇지 않으면 비교가 무효입니다.
함정 3: 명판 시간당 사이클 사용
마케팅 사이클 속도는 완벽한 조건을 가정합니다. 실제 라인은 냉각 및 핸들링 한계를 고려할 때 소형 병의 경우 시간당 600~900 사이클을 실행하며, 최상의 경우 명판 수치의 80%~88%로 모델링하십시오.
함정 4: 수지를 고정 비용으로 취급
수지는 비용의 55%~70%를 차지하며 폴리머 시장에 따라 변동합니다. 단일 고정 가격 대신 ±20%의 수지 민감도를 반영하십시오.
함정 5: 포장 및 물류를 간과하는 것
이러한 후공정 라인은 병당 0.003~0.013 USD를 추가합니다. 이를 제외하면 자체 라인이 납품 라인보다 부당하게 저렴해 보이며, 그 반대의 경우도 마찬가지입니다.
함정 6: 간접비 과소 배분
공장 임대료, QA, 관리 비용은 대량 생산해도 사라지지 않으며 단순히 희석될 뿐입니다. 병당 최소 0.002~0.005 USD를 할당하지 않으면 모델이 인위적으로 날씬해 보일 수 있습니다.
재료별 비용 비교
수지 선택은 다른 어떤 기계 설정보다 단위 비용을 좌우합니다. 폴리머 간 소재 가격과 밀도가 크게 다르기 때문입니다. 아래 표는 다른 모든 비용 항목을 동일하게 유지한 채 대표적인 가격대에서 네 가지 일반적인 IBM 소재의 12g 병에 대한 병당 소재 비용을 비교합니다.
| Material | Price Band | Resin Cost (12 g) | Typical Application |
|---|---|---|---|
| PP homopolymer | 1.10 to 1.40 USD per kg | 0.0132 to 0.0168 USD | Pharma, cosmetics, food |
| HDPE | 1.00 to 1.30 USD per kg | 0.0120 to 0.0156 USD | Personal care, pharma |
| PS / SAN | 1.20 to 1.60 USD per kg | 0.0144 to 0.0192 USD | Clear cosmetic, diagnostic |
| Medical / PCR grade | 1.50 to 2.20 USD per kg | 0.0180 to 0.0264 USD | Regulated pharma, EU 10/2011, FDA |
The spread between commodity HDPE and regulated medical grade is roughly 0.006 to 0.010 USD per 12 g bottle, or 20 percent to 60 percent of the entire non-material cost stack. For a regulated pharma bottle the material premium is unavoidable, but for a standard cosmetic or nutraceutical bottle, selecting PP over a premium clear grade can cut unit cost meaningfully without changing the machine. Aibim’s IBM lines process all of these materials on the same platform, so material strategy is a pure commercial decision rather than a capital one.
요금 및 지역 민감도
에너지는 단위 비용에서 작은 비중을 차지하지만, 전기 요금은 지역에 따라 크게 다르기 때문에 기계를 바꾸지 않아도 절대 에너지 비용은 몇 배로 변할 수 있습니다. 표는 일반적인 산업용 요금제에서 12g 병당 에너지 비용을 보여줍니다.
| Region Tariff | USD per kWh | Energy per 12 g Bottle | Annual Energy (20M bottles) |
|---|---|---|---|
| Low tariff | 0.06 | 0.00029 USD | 5,760 USD |
| Mid tariff | 0.12 | 0.00058 USD | 11,520 USD |
| High tariff | 0.22 | 0.00106 USD | 21,120 USD |
Even at the highest tariff, energy for a 12 g bottle is about 0.0011 USD, a fraction of total cost, so siting decisions should weigh labor and logistics far more than power price for small-bottle IBM. Aibim’s PREFILL hydraulic design, which cuts energy consumption by at least 35 percent, matters most in high-tariff markets and on three-shift lines where cumulative kWh are largest. The bigger geographic lever is labor: a region with loaded operator cost of 12,000 USD per year versus 40,000 USD per year changes per-bottle labor by 0.001 to 0.004 USD, which dwarfs the energy tariff effect.
5년 총소유비용(TCO)
Per-bottle cost answers the unit question; total cost of ownership answers the asset question. For a capital approval you need both. The table below projects a five-year cost stack for the base-case IBM65 eight-cavity line running 12 g PP bottles at two shifts, 80 percent utilization, 20.2 million bottles per year, with resin, energy, labor, mold, depreciation, maintenance, packaging, and overhead summed and then expressed per bottle.
| Cost Category | Per Year | Five Years | Per Bottle |
|---|---|---|---|
| Resin plus colorant | 323,200 USD | 1,616,000 USD | 0.0160 USD |
| Energy plus labor | 80,800 USD | 404,000 USD | 0.0040 USD |
| Mold plus depreciation | 60,600 USD | 303,000 USD | 0.0030 USD |
| Maintenance plus overhead | 101,000 USD | 505,000 USD | 0.0050 USD |
| Packaging plus logistics | 80,800 USD | 404,000 USD | 0.0040 USD |
| Total | 646,400 USD | 3,232,000 USD | 0.0320 USD |
Over five years this line consumes about 3.23 million USD of total cost to produce roughly 101 million bottles, an average unit cost of 0.0320 USD once the first year’s slightly higher start-up scrap is averaged out. Set against the 0.0520 USD contract price, the cumulative gross margin across five years is roughly 2.02 million USD, comfortably covering the 170,000 USD installed investment many times over. The Wanplas brand’s 500 USD annual free-parts allowance and quality guarantee are folded into the maintenance line, improving the predictability of the five-year figure. The takeaway for procurement is that the per-bottle model and the five-year ownership model tell the same story: material and utilization dominate, and the IBM process structure keeps recurring cost low enough to make the asset self-funding within the first year.
자주 묻는 질문(FAQ)
사출 블로우 성형 병의 일반적인 단위 비용은 얼마입니까?
For a 12 g HDPE or PP small bottle at volume, total unit cost typically ranges from 0.024 USD to 0.045 USD per bottle depending on resin grade, cavity count, and overhead allocation. Resin is usually 55 percent to 70 percent of that cost, and optimized high-cavitation three-shift operation can reach the lower end of the band.
IBM에서 가장 큰 비용 요소는 무엇인가?
Resin and colorant dominate, accounting for the majority of per-bottle cost. Energy, labor, and mold amortization are comparatively small and are where process efficiency, such as Aibim’s PREFILL hydraulic system, recovers the most margin. This ranking is why a 5 percent resin saving outweighs a 20 percent energy saving in absolute unit-cost terms, and why material specification decisions deserve as much engineering attention as machine selection.
스크랩은 단위 비용을 얼마나 증가시키는가?
2% 스크랩률에서는 양품 병당 약 2% 더 많은 수지와 에너지를 소비합니다. 제어되지 않은 7% 비율에서는 숨겨진 승수가 총 단위 비용에 5%~9%를 추가할 수 있으며, 이것이 스크랩 제어가 최우선 절감 수단인 이유입니다.
캐비테이션이 높을수록 항상 단위 비용이 낮아지나요?
Almost always, because mold and depreciation spread across more bottles per cycle. The exception is when high cavitation is paired with low utilization, where the unused capacity fails to dilute fixed cost and the mold premium is wasted. A practical rule is to size cavitation to at least 70 percent of expected steady demand rather than to the peak, reserving the headroom for surge orders without committing fixed cost to idle cavities.
병당 에너지는 어떻게 계산해야 합니까?
병 중량(kg)에 비에너지(IBM의 경우 kg당 약 0.30~0.55 kWh)를 곱하여 병당 kWh를 구한 다음 전기 요금을 곱하십시오. kWh당 0.12 USD에서 12g 병의 에너지 비용은 약 0.0006 USD입니다.
단일 교대 IBM이 비용 경쟁력이 있을 수 있습니까?
활용률이 자연적으로 제한되는 저용량 또는 캡티브 틈새 병에만 해당합니다. 표준 의약품 또는 화장품 용량의 경우, 단일 교대에서는 인건비와 간접비가 잘 분산되지 않으므로 경쟁력 있는 단위 비용에 도달하려면 2~3교대가 필요합니다.
IBM 비용과 EBM 비용을 공정하게 비교하려면 어떻게 해야 하나요?
EBM의 디플래싱 및 트리밍 인력과 장비, 그리고 더 높은 4%~8%의 스크랩을 병당 모델에 추가하십시오. 동일 조건에서 IBM은 유사한 기계 인보이스에도 불구하고 소형 병의 반복 비용에서 일반적으로 우위를 점합니다.
병당 얼마의 간접비를 배분해야 합니까?
공장 임대료, 품질 관리, 관리비 및 간접 설비 비용을 대량 생산 시 병당 최소 0.002~0.005 USD로 배분하십시오. 간접비를 제외하면 모델이 효율적으로 보이지만 재무 검토에 실패합니다.
결론
The unit production cost of an injection blow molded bottle is governed first by resin and scrap, then by how well you dilute fixed cost through cavitation and shifts. For a reference Aibim IBM65 or IBM75 line, a 12 g bottle lands near 0.0260 to 0.0350 USD depending almost entirely on utilization, with energy and labor contributing only a small, controllable share. The levers that matter are lightweighting, scrap discipline, cavitation, and shift count, supported by Aibim’s PREFILL energy-saving hydraulics and CE-certified stripper sensing. Build your model on good-bottle output, include packaging and overhead, and stress-test resin; do that and your per-bottle cost will hold up to scrutiny. Contact the Aibim engineering team, part of the Wanplas brand, for a tailored cost model based on your exact bottle weight, material, cavity count, and annual volume.






