완전한 턴키 IBM 솔루션의 의미
A full turnkey IBM solution is more than a single injection blow molding machine sitting on a truck. It is a complete, production-ready system that hands the buyer a running line rather than a collection of loose components. Aibim, a Wanplas factory with 12+ years of experience in plastic machinery manufacturing, positions the turnkey offer as the fastest and lowest-risk route from a product concept to commercial bottles. With its own CNC machining center, a new factory purchased in 2022, and an annual production capacity of more than 100 lines, Aibim treats the turnkey package as a single accountable deliverable: one supplier, one responsibility boundary, one acceptance point.
The core idea of turnkey delivery is accountability. When a buyer sources the machine from one vendor, the mold from another, the auxiliary equipment from a third, and the process know-how from somewhere else, every interface becomes a finger-pointing opportunity the first time a bottle comes out with a defect. Aibim closes those gaps by bundling the host machine, the full mold set, the validated process formula, the auxiliary equipment, the training, the installation, and the acceptance testing into one scope. The buyer receives a line that has already produced good bottles under agreed conditions before it leaves the factory, and a team that knows how to run it after it arrives.
This article explains every element of that bundle. It covers the three-station one-step injection blow molding principle, the real Aibim machine series and their specifications, the mold design rules, the material-specific formula pack, the operator training system, the installation and acceptance workflow, defect troubleshooting, capacity planning, model selection, application industries, and the service commitments that protect the investment. By the end, a procurement or engineering manager should be able to scope a project, brief a team, and evaluate a supplier proposal with confidence.
턴키 납품 범위 한눈에 보기
아래 표는 표준 Aibim 턴키 IBM 패키지에 정확히 무엇이 포함되는지, 무엇이 옵션으로 제공되는지, 그리고 무엇이 고객의 책임으로 남는지를 정의합니다. 경계가 사전에 명시되므로 프로젝트 계획, 유틸리티 준비 및 예산 할당이 모호하지 않습니다.
| Scope Item | Included | Optional | Customer-Supplied |
|---|---|---|---|
| IBM host machine (injection + blow + ejection) | Yes | Higher cavitation variants | — |
| Preform mold (injection cavity block) | Yes | Spare cavity set | — |
| Blow mold (bottle forming cavity) | Yes | Multi-cavity upgrade | — |
| Core rods (transfer mandrels) | Yes, full set + spares | Coated upgrade | — |
| Hopper dryer / dehumidifying dryer | Yes | Central drying | — |
| Vacuum loader / feeder | Yes | Central feeding | — |
| Mold temperature controller | Yes | Oil unit for high temp | — |
| Industrial water chiller | Yes | Larger capacity | — |
| Blow air compressor | Optional | Oil-free high-pressure | Often customer-supplied |
| Conveyor and bottle collector | Yes | Inline inspection | — |
| 공정 포뮬러 및 파라미터 팩 | Yes | Color masterbatch tuning | — |
| Operator training program | Yes | Extended on-site | — |
| Installation and commissioning | Yes (engineer on-site) | Remote-first option | Foundations, utilities |
| Acceptance testing (FAT and SAT) | Yes | Third-party witness | — |
| First-year spare parts support | Yes (USD 500 free parts/year) | Extended kit | — |
The boundary between “optional” and “customer-supplied” is the most important planning item. Aibim typically supplies the blow air compressor as an option rather than standard, because many factories already operate a plant air system; the buyer should confirm available pressure and flow before contract signature so the line is not delayed by a missing utility.
3스테이션 원스텝 IBM 공정의 작동 방식
Injection blow molding is a one-step, three-station process that combines injection molding and blow molding into a single closed loop on one machine. The defining feature is the core rod, a precision mandrel onto which the parison is injected and on which the parison travels between stations. Because the bottle is formed entirely inside steel cavities, the process produces containers with excellent neck finish accuracy, tight dimensional control, and no flash that would require trimming. This is the central reason pharmaceutical, cosmetic, and food brands choose IBM over processes that leave a scrap tail.
사출 스테이션: 파리송 및 프리폼 형성
In the first station, the injection unit plasticizes the resin in the barrel and injects it into the preform mold around the core rod. The preform mold shapes the neck finish, the thread, and the tamper-evident band with full steel-surface fidelity, while the body is formed as a thick-walled parison sized to be blown out later. The core rod acts as the internal cavity for the parison interior and as the transfer device between stations. Gate design here determines where the material enters and whether a cold slug or needle-valve cut is used. Because the neck is molded, not cut or welded, its geometry is reproducible bottle after bottle.
블로우 스테이션: 팽창에 의한 병 성형
After the injection station, the rotating table indexes the core rod (still carrying the warm parison) to the blow station. Here the parison is inflated against the cooled blow mold cavity by compressed air at a typical pressure between 0.6 MPa and 1.0 MPa. For machines configured as injection stretch blow molding, a stretch rod extends to orient the polymer biaxially, which improves clarity, barrier, and top-load for materials such as PET. The bottle cools against the steel wall and sets to the final shape. There is no scrap, no cutoff, and no post-mold trimming step.
이젝션 스테이션: 탈형 및 배출
The third station receives the finished bottle on the core rod and strips it off, usually by an air-assisted stripper or mechanical take-off, then drops or conveys it to the collection point. Aibim machines use a stripper station with a long-distance digital laser sensor for mold safety and a light curtain for personal safety, consistent with CE certification requirements. The empty core rod returns to the injection station and the cycle repeats. One rotation of the indexing table produces one finished bottle per cavity per cycle.
넥 정밀도가 압출 블로우 성형보다 우수한 이유
In extrusion blow molding, the parison is extruded from a die head and pinched at the base, which leaves a weld line and a tail that must be removed by deflashing. The neck is formed by a blow pin rather than a steel cavity, so thread accuracy and sealing consistency are harder to control. By contrast, IBM molds the neck as a precision injection-molded feature, giving pharmaceutical and cosmetic customers a container whose cap seals predictably on every unit. For tamper-evident and child-resistant closures, that repeatability is not a luxury; it is a compliance requirement.
턴키 프로젝트용 Aibim 기계 시리즈
Aibim builds three core platforms for the turnkey IBM program: the IBM75, the IBM65, and the IBM55 Hybrid Electric. All three are three-station, one-step machines covering containers from 3 ml to 1000 ml. The IBM75 is the high-output, large-format platform; the IBM65 is the mid-range workhorse; and the IBM55 Hybrid Electric is the compact, energy-efficient platform for small medical, cosmetic, and oral-care bottles. The specifications below are typical values for standard configurations and will be confirmed against the exact mold and material in the project quotation.
IBM75 사출 블로우 성형기
The IBM75 is the largest standard platform in the Aibim range, built for containers from 50 ml to 1000 ml and for high cavitation where output matters more than floor-space economy. Its single-crossbeam, double-pole clamping framework enlarges the mold-setting space and stabilizes the platen during high-speed cycling. With PREFILL technology and a variable-displacement pump in the hydraulic system, it saves a meaningful share of energy compared with conventional hydraulic machines, while the SD-card parameter storage lets recipes be saved and re-installed across multiple machines.
| Parameter | IBM75 Typical Value |
|---|---|
| 클램핑 포스 | 75 ton (approximately 750 kN) |
| Screw diameter | 45 mm |
| Shot size (max) | approximately 270 cm³ / 245 g (PP) |
| Cavity number range | 2 to 12 |
| Product volume range | 50 ml to 1000 ml |
| Installed power | approximately 38 kW |
| Cycle time | 10 to 14 seconds |
| Machine dimensions (L x W x H) | 4.3 x 1.6 x 2.3 meters |
| 기계 무게 | approximately 9.8 ton |
IBM65 사출 블로우 성형기
The IBM65 is the balanced mid-size platform, covering 15 ml to 500 ml containers with flexible cavitation for both pharmaceutical and cosmetic runs. It shares the same clamping framework philosophy as the IBM75 and the same PREFILL hydraulics, making it a common choice when a plant needs one machine that can serve several product families. The wider useful cavity range lets a buyer standardize on a single model for most of the catalog.
| Parameter | IBM65 Typical Value |
|---|---|
| 클램핑 포스 | 65 ton (approximately 650 kN) |
| Screw diameter | 40 mm |
| Shot size (max) | approximately 190 cm³ / 172 g (PP) |
| Cavity number range | 2 to 10 |
| Product volume range | 15 ml to 500 ml |
| Installed power | approximately 30 kW |
| Cycle time | 9 to 12 seconds |
| Machine dimensions (L x W x H) | 3.9 x 1.45 x 2.2 meters |
| 기계 무게 | approximately 7.6 ton |
IBM55 하이브리드 전동 사출 블로우 성형기
The IBM55 Hybrid Electric is the compact platform for small containers from 3 ml to 250 ml, where precision and energy efficiency matter more than maximum cavitation. The hybrid electric drive reduces installed power and stabilizes repeatability, which is valuable for low-volume, high-value medical and cosmetic items where color and dimension consistency are scrutinized. It is the natural starting point for a new entrant that wants a turnkey line without committing to the footprint and power of the larger platforms.
| Parameter | IBM55 Hybrid Typical Value |
|---|---|
| 클램핑 포스 | 55 ton (approximately 550 kN) |
| Screw diameter | 35 mm |
| Shot size (max) | approximately 130 cm³ / 118 g (PP) |
| Cavity number range | 2 to 8 |
| Product volume range | 3 ml to 250 ml |
| Installed power | approximately 22 kW (hybrid servo) |
| Cycle time | 8 to 11 seconds |
| Machine dimensions (L x W x H) | 3.5 x 1.35 x 2.05 meters |
| 기계 무게 | approximately 6.2 ton |
세 플랫폼 모두 Aibim 자체 CNC 센터에서 설계 및 제조되며, 이를 통해 예비 부품의 리드 타임을 단축하고 병 품질을 결정하는 정밀 부품을 엄격하게 관리할 수 있습니다. 2022년 신공장은 이 생산 능력을 연간 100개 이상의 라인으로 확장합니다.
금형 설계 및 툴링 패키지
The mold set is the heart of any IBM turnkey project. It consists of three coordinated components: the preform mold that shapes the parison and neck on the core rod, the blow mold that forms the final bottle, and the core rods that carry the parison between stations. Aibim designs and builds these as a matched set so that the neck transfer, cooling balance, and wall distribution are optimized together rather than bolted together from mismatched sources.
코어 로드 설계 및 코팅
The core rod is the most stressed and most critical tooling element. It must withstand repeated thermal cycling, injection pressure, and the mechanical force of stripping the finished bottle. Core rods are typically made from a through-hardened hot-work steel and finished to a fine surface so the bottle interior releases cleanly. For sticky or clear materials, a hard functional coating reduces adhesion and extends the interval between maintenance sessions. Because the core rod defines the internal shape and the neck bore, its dimensional stability directly controls whether caps seat correctly.
프리폼 금형 게이트 및 러너 시스템
The preform mold uses either a needle-valve hot runner or a cold runner. A needle-valve hot runner gives a clean gate with minimal vestige and is preferred for cosmetic and medical bottles where any gate blemish is unacceptable. A cold runner is simpler and lower cost but leaves a small cold slug that must be managed. Cavity count and balanced runner layout decide whether every preform fills at the same pressure and temperature; an unbalanced runner produces cavitation-to-cavitation weight variation that shows up later as bottle-weight standard deviation. Aibim balances the runner hydraulically and thermally during mold validation.
넥 나사산, 변조 방지 밴드, 벤팅 및 냉각
The neck thread and tamper-evident band are formed in the preform mold with full steel fidelity, which is why IBM neck quality is superior to cut-neck processes. Venting must be placed so air escapes as the parison forms; poor venting causes short shots and burn marks at the neck. Cooling is decisive: the blow mold is water-cooled, and the core rod has internal cooling channels that pull heat from the parison interior. Balanced cooling shortens the cycle and reduces residual stress that can cause post-mold warpage. Mold steel is selected by duty: pre-hardened mold steel for general cavities, stainless grades for corrosive or medical applications, and hardened hot-work steel for core rods.
금형 수명 및 유지보수 주기
Mold life depends on material abrasiveness, runner type, and maintenance discipline. A well-maintained preform and blow mold set will run for a very large number of cycles before rework. The practical limit is usually surface wear and dimensional drift rather than sudden failure. Aibim supplies a maintenance schedule as part of the turnkey package: routine cleaning, core rod inspection, gate tip checks, and cooling-channel descaling at defined intervals. Keeping to that schedule is the single biggest factor in holding bottle-weight consistency over years of production.
공정 포뮬러 및 파라미터 팩
A process formula is the complete set of machine settings that reliably makes a good bottle from a specific resin. Delivering it as part of the turnkey package means the buyer does not start from a blank screen. Aibim provides a validated starting recipe for the contracted material, tuned on the actual mold during factory acceptance, and stored on the SD card for re-installation. The table below gives representative parameter windows for the main IBM materials; the final values are optimized per mold and confirmed during acceptance.
재료별 건조 요구 사항
Hygroscopic materials must be dried before they enter the barrel, because moisture turns to steam in the melt and causes splay, hazing, and weak neck definition. PET is the strictest case: it must be dried to below 50 ppm moisture at a dew point of -40 degrees C, typically for four to six hours, before stretch blow. PETG, PLA, and some clear styrenic resins also need desiccant drying, while PP and PE are essentially non-hygroscopic and need only hopper warming to drive off surface moisture. The formula pack states the exact dryer setpoint and residence time for the contracted resin.
| Material | Barrel Temp (feed to front, C) | Melt Temp (C) | Injection Pressure (MPa) | Holding Pressure (MPa) | Cooling Time (s) | Blow Pressure (MPa) | Drying Requirement |
|---|---|---|---|---|---|---|---|
| PP | 200 / 220 / 230 / 240 | 230 to 250 | 80 to 120 | 40 to 70 | 4 to 8 | 0.7 to 0.9 | Hopper warm, 80 C, 2 h (optional) |
| HDPE / LDPE | 160 / 180 / 200 / 210 | 200 to 220 | 70 to 110 | 35 to 60 | 5 to 9 | 0.6 to 0.8 | Not required |
| PET (via stretch) | 260 / 270 / 280 / 285 | 270 to 285 | 90 to 130 | 50 to 80 | 3 to 6 | 0.8 to 1.0 | Dew point -40 C, below 50 ppm, 4 to 6 h |
| PETG / PCTG | 220 / 230 / 240 / 245 | 230 to 250 | 80 to 120 | 40 to 70 | 4 to 7 | 0.7 to 0.9 | 65 C, 3 to 4 h, dew point -40 C |
| PS | 180 / 200 / 210 / 220 | 200 to 230 | 70 to 110 | 35 to 60 | 4 to 7 | 0.6 to 0.8 | 70 C, 1 to 2 h (optional) |
| PLA (bio-based) | 170 / 180 / 190 / 195 | 185 to 205 | 60 to 100 | 30 to 55 | 4 to 8 | 0.6 to 0.8 | 80 C, 3 to 4 h, dew point -40 C, below 250 ppm |
These windows are starting points, not final recipes. The barrel profile, injection speed, and holding pressure are fine-tuned during factory acceptance against the real mold so the buyer receives numbers that already produce good bottles. Saving those numbers to the SD card means a second identical machine can be brought online with the same recipe in minutes.
규제 응용 분야를 위한 재료 적응
Injection blow molding serves markets where material purity and consistency are regulated, not optional. The turnkey formula pack is therefore written around the behavior of each resin family and the cleanliness the application demands. Aibim machines process PE, PP, PS, ABS, SAN, clear styrenic resin, PC, PETG/PCTG, and, in stretch configuration, PET and bio-based PLA.
의료용 PP 및 투명 스티렌계 수지
Medical and pharmaceutical bottles are most often made from medical-grade PP with a melt flow rate in the range of 20 to 40 g per 10 minutes, which balances flow for thin necks with enough stiffness for the body. Clear styrenic resin (often called K-resin in the trade) is used where glass-like clarity is needed for unit-dose and diagnostic vials, though it is softer and less chemical-resistant than PP. For containers that contact the body or medication, biocompatibility is documented against USP Class VI and ISO 10993 as applicable; the resin supplier provides the official test data and the molder maintains a clean, controlled process so extractables stay within the validated envelope.
연신 블로우를 통한 PET 및 PETG
PET is processed on Aibim I(S)BM machines with in-line stretch, which orients the polymer and yields clear, strong bottles suitable for water, beverage, and some pharmaceutical applications. The intrinsic viscosity is typically in the range of 0.72 to 0.84 dL/g; outside that window the stretch behavior and bottle properties shift. PETG and its copolymer PCTG are processed without stretch for clarity and impact, useful for cosmetic and diagnostic packaging where a glossy, amorphous look is wanted. Both require strict drying, and both reward a clean, low-shear barrel profile that avoids thermal degradation.
청결, 용출물 및 규정 준수
For pharmaceutical and food contact, the documented chain is resin certification, clean conveyance, controlled drying, and a validated process with minimal residence time at temperature. The buyer should request the resin’s food-contact and biocompatibility documentation and confirm the local regulatory framework, because the machine maker supplies the process, not the regulatory certificate. Aibim supports this by keeping the material path clean, avoiding unnecessary shear, and documenting the process window that was accepted during factory testing.
운전자 교육 시스템
A line is only as good as the people who run it. The turnkey package includes a structured operator training program so the buyer’s team can start production confidently and maintain quality without depending on the supplier for every adjustment. Training is modular, hands-on, and assessed, and it is delivered both at the factory during acceptance and on-site during commissioning.
| Training Module | Duration | Assessment Method | Target Position |
|---|---|---|---|
| Safety and lockout procedure | 0.5 day | Written quiz + demonstration | All operators |
| Start-up and shut-down SOP | 0.5 day | Supervised run | Line operator |
| Parameter adjustment and recipe call-up | 1 day | Practical test on live machine | Senior operator |
| Mold change and color change | 1 day | Timed changeover | Mold technician |
| Daily maintenance and lubrication | 0.5 day | Checklist audit | Maintenance staff |
| Fault diagnosis and troubleshooting | 1 day | Scenario drill | Senior operator / technician |
| Quality judgment and sampling | 0.5 day | Defect identification test | QC inspector |
이 프로그램은 총 약 5일간의 통합 교육으로, 구매자의 인력 계획에 따라 확대 또는 축소됩니다. 모든 교육생은 표준 운영 절차를 문서로 받으며, 승인에 사용된 레시피가 문서화되어 팀이 추측 없이 검증된 창을 재현할 수 있습니다.
설치 및 시운전 워크플로우
설치 및 시운전은 출하된 기계를 가동 라인으로 전환합니다. Aibim은 현장 작업을 위해 엔지니어를 파견하며, 구매자는 유틸리티 공백으로 기간을 잃지 않도록 기초, 전력, 물, 공기 및 배수를 사전에 준비합니다. 아래 순서는 표준 턴키 흐름입니다.
- 도착 인수. 포장 목록과 대조하여 선적물을 확인하고, 운송 중 손상을 검사하며, 범위 품목이 존재하는지 확인하십시오.
- 위치 설정 및 레벨링. 준비된 기초 위에 기계를 놓고 인덱싱 테이블이 정확히 회전하도록 프레임을 레벨링하십시오.
- 유틸리티 연결. 제공된 유틸리티 일정에 따라 전원, 냉각수, 공장 공기 및 모든 배수구를 연결하십시오. (이 라인을 위한 전용 작업장 전원, 바닥 면적 및 환경 계획은 별도의 가벼운 준비 주제로 처리되며 여기서는 간략히만 요약됩니다.)
- 무부하 운전. 몰드 없이 기계를 작동하여 동작, 안전 장치 및 제어 로직을 확인하세요.
- 금형 시험. 프리폼 금형, 블로우 금형, 코어 로드를 장착한 후 재료로 가동하여 충전과 블로우를 확인하십시오.
- 첫 제품 확인. 도면과 대조하여 첫 병의 넥, 벽, 중량, 외관을 검사하십시오.
- 연속 가동 인수 검사. 합의된 사이클 수를 가동하고 생산량, 양품률, 안정성을 기록하십시오.
- 생산 능력 및 수율 서명. 라인이 계약된 캐비티, 사이클, 양품 병 목표를 충족하는지 확인한 후 인도하십시오.
이 작업 흐름은 FAT 중에 공장에서 그대로 재현되므로, 기계가 구매자의 공장에 도착할 때쯤에는 공정이 이미 검증되어 있으며 현장 단계는 새로 발견하는 것이 아니라 검증하는 것입니다.
공장 및 현장 승인 기준
승인은 턴키 약속이 측정되는 지점입니다. Aibim은 두 개의 게이트를 적용합니다: 출하 전 Aibim 공장에서의 공장 승인 테스트(FAT)와 구매자 공장 설치 후의 현장 승인 테스트(SAT)입니다. 기준은 계약에서 합의되고 양측이 서명한 보고서에 기록됩니다.
| Acceptance Metric | Typical Target | How It Is Measured |
|---|---|---|
| Continuous run duration | Several hours at contracted cavitation | Timed production log |
| Good-bottle rate | High, contract-defined percentage | Sampled inspection |
| Cycle time attainment | Within agreed tolerance | Cycle counter over the run |
| Bottle-weight standard deviation | Tight, cavity-to-cavity | Weighing sampled bottles |
| Visual appearance | No flash, no haze, clean neck | Visual and gauge check |
| Noise and energy | Within declared envelope | Sound meter and power meter |
FAT와 SAT에서 동일한 기준을 검사하기 때문에 공장 시험 통과는 원활한 현장 시험의 강력한 예측 지표가 됩니다. 이 보고서는 또한 향후 유지보수의 기준이 됩니다. 병 중량이 벗어나기 시작하면 승인 기준을 통해 팀은 정상 상태가 어떤 모습이었는지 알 수 있습니다.
일반적인 결함 및 대책
검증된 공정도 드리프트할 수 있으며, 운영자 교육은 초기 징후를 읽는 방법을 다룹니다. 아래 표는 가장 흔한 IBM 결함을 가능한 원인과 첫 번째 시정 조치에 매핑하여 서비스 호출 없이 라인을 신속하게 복구할 수 있게 합니다.
| Defect | Likely Cause | Countermeasure |
|---|---|---|
| Neck flash or fin | Worn neck cavity, excess injection pressure | Inspect and refurbish cavity; lower injection pressure |
| Core rod sticking | Resin buildup, poor coating, insufficient cooling | Clean rod, check coating, raise internal cooling |
| 벽 두께 변동 | Unbalanced runner, off-center parison | Rebalance runner, check core rod alignment |
| Bottle haze | Moisture, overheat, degraded resin | Verify drying, lower melt temp, shorten residence |
| Sink mark | Insufficient holding, hot local section | Raise holding pressure or time, improve cooling |
| Bottom pinhole | Trapped gas, contamination, thin base | Improve venting, clean resin, adjust parison |
| Ejection difficulty | Under-cooled bottle, stripped too early | Extend cooling, verify stripper timing |
| Color difference | Masterbatch letdown drift, batch change | Standardize let-down, re-confirm recipe |
이러한 결함의 대부분은 온도 균형, 냉각 시간 및 수지 상태라는 세 가지 변수로 거슬러 올라갑니다. 포뮬러 팩은 검증된 창을 설정하고, 교육은 운영자에게 증상을 쫓기보다 한 번에 하나의 변수를 조정하도록 가르칩니다.
생산 능력 계산 및 생산 계획
Capacity is the product of cycle time, cavity count, and effective operating hours, discounted by the real-world efficiency known as overall equipment effectiveness. A simple planning formula is: bottles per hour equals cavities multiplied by 3600 divided by cycle time in seconds. Effective output then applies the operating hours and an efficiency factor that accounts for changeovers, minor stops, and planned maintenance.
| Model | Cavities | Cycle (s) | Bottles / Hour | Per 8h Shift | Per Month (2 shifts, 25 days) |
|---|---|---|---|---|---|
| IBM75 | 8 | 12 | 2400 | 19200 | 960000 |
| IBM65 | 6 | 11 | 1963 | 15709 | 785450 |
| IBM55 Hybrid | 4 | 10 | 1440 | 11520 | 576000 |
The monthly figures above are theoretical maxima at continuous running. In practice, overall equipment effectiveness of 75 to 85 percent is a realistic planning assumption once changeovers, start-up loss, and scheduled maintenance are included. Changeover time between products is a major lever: a faster, better-documented mold change directly raises effective output more than a slightly shorter cycle. That is why the training program drills timed changeovers and why the SD-card recipe storage matters for repeatability.
선택 가이드: 제품에 맞는 Aibim 모델 선택
올바른 모델 선택은 기계가 아닌 제품에서 시작됩니다. 생산량, 목표 출력, 소재 및 캐비테이션이 함께 하나의 Aibim 플랫폼을 가리킵니다. 아래 표는 계획 보조 자료이며, 최종 권장 사항은 실제 병 도면과 수지에 대해 Aibim 엔지니어링이 확인합니다.
| Product Volume | Target Output | Material | Cavity Range | Recommended Aibim Model |
|---|---|---|---|---|
| 3 to 30 ml | Medium to high | PP, PE, PS, clear styrenic | 2 to 8 | IBM55 Hybrid Electric |
| 15 to 150 ml | Medium to high | PETG, PET (stretch), PP | 2 to 10 | IBM65 |
| 150 to 500 ml | Medium | PP, HDPE, PETG | 2 to 10 | IBM65 or IBM75 |
| 500 to 1000 ml | High | HDPE, PP, wide-mouth | 2 to 12 | IBM75 |
| Cosmetic vial, any small size | Flexible | PETG, clear styrenic, PP | 2 to 8 | IBM55 Hybrid or IBM65 |
| Pharma pill or oral bottle | Medium to high | PP, HDPE | 2 to 12 | IBM65 or IBM75 |
When output is the dominant constraint, move up a platform and add cavities; when precision and energy are dominant, the IBM55 Hybrid is usually the right answer even at lower volume. Aibim engineers will confirm the exact cavitation that fits the platen and shot size so the quoted cycle is achievable.
응용 산업 및 최종 제품
Aibim’s turnkey IBM lines serve applications where the neck, hygiene, and appearance of a small container decide product quality. The real application fields built into the Aibim program are pharmaceuticals, food, drink, and cosmetics, and they translate into concrete end products that buyers recognize immediately.
In pharmaceuticals, the lines make medicine bottles, oral liquid bottles for syrup and suspension, and eye drop bottles where a precise dropper neck is essential. In health products, they make supplement and vitamin bottles in the 50 ml to 250 ml range with tamper-evident necks. In cosmetics, they make small mascara, lip gloss, serum, and sample vials where clarity and a clean neck sell the brand on the shelf. In daily chemical packaging, they make travel-size shampoo, conditioner, and lotion bottles, plus single-use sachet-style mini bottles for hotels and airlines. In food and drink, they make unit-dose and condiment bottles where a tight-sealing neck protects flavor and prevents leakage.
공통점은 까다로운 넥을 가진 소형 용기입니다. 이것이 바로 IBM이 가장 잘 생산하는 기하학이며, 후공정 트리밍과 검사가 필요한 공정과 비교하여 턴키 IBM 라인이 의약품 및 화장품 등급 병에 가장 경제적인 경로인 이유입니다.
서비스 및 지원 약속
턴키 관계는 선적에서 끝나지 않습니다. Wanplas 공장으로서 Aibim은 그룹의 공유 서비스 약속을 적용하며, 프로젝트 패키지는 구매자의 가동 시간과 생산량을 보호하는 구체적이고 문서화된 약속으로 뒷받침됩니다.
- 선적 전 테스트. 모든 라인은 공장을 떠나기 전에 계약된 금형과 재료로 공장 승인 테스트(FAT)를 통과하며, 기록된 보고서가 제공됩니다.
- 설치 및 시운전. Aibim 엔지니어가 구매자 현장을 방문하여 설치, 정렬, 유틸리티 연결을 수행하고 승인 기준에 맞춰 라인을 가동합니다.
- 예비 부품. 첫 해에는 연간 USD 500 상당의 무료 부품이 포함되며, 보증 기간 내 손상된 부품의 무료 교체를 보증서가 보장합니다.
- 교육. 모듈식 작업자 교육 프로그램은 공장과 현장에서 문서화된 절차와 검증된 레시피와 함께 제공됩니다.
- 원격 운영 및 유지보수. 제어 시스템은 원격 모니터링과 매개변수 백업을 지원하며, SD 카드 레시피 저장을 통해 설정을 기계 간에 공유할 수 있습니다. 엔지니어는 공정 데이터를 원격으로 검토하여 고장 진단 시간을 단축할 수 있습니다.
- 오픈 팩토리. Aibim은 구매 전후에 제조 시설, CNC 센터, 시험 가동 라인을 살펴보기 위한 고객의 장자강(Zhangjiagang) 공장 방문을 환영합니다.
These commitments are part of the Wanplas brand-level promise to its customers: free parts, transport guarantee, production capacity guarantee, and quality standards. For a turnkey buyer, they mean one accountable partner from contract to commercial production and through the first year of operation.
프로젝트 일정 개요
A turnkey project is a sequence of staged gates, each with its own duration. The table below is a typical gantt-style view in weeks; exact durations shift with customization, mold complexity, and destination. No monetary amounts are shown because the engagement is scoped by configuration, not by a single published price.
| Stage | Typical Duration (weeks) | Key Output |
|---|---|---|
| Contract and specification | 1 | Locked scope and acceptance criteria |
| Manufacturing and mold build | 8 to 12 | Machine and matched mold set |
| Factory acceptance testing | 1 | Validated recipe and report |
| Shipment | 2 to 5 by region | Delivered to site |
| Installation and commissioning | 1 to 2 | Line running on-site |
| Operator training | 1 | Certified operators |
| Mass production | Ongoing | Commercial output |
Relative investment level for the complete turnkey package rises from Low for a basic IBM55 single-cavity starter line, through Medium for a standard multi-cavity IBM65, to High for a high-cavitation IBM75, and Very High or Premium for fully customized multi-cavity medical-grade lines with extended validation. The right level is set by the product and the regulatory load, not by a fixed list price.
자주 묻는 질문(FAQ)
Aibim의 완전 턴키 IBM 솔루션에는 정확히 무엇이 포함됩니까?
A full turnkey package covers the injection blow molding machine, the complete mold set (preform mold, blow mold and core rods), auxiliary equipment, a validated process formula and parameter pack, operator training, on-site installation and commissioning, acceptance testing, and the first year of spare parts support. The buyer receives a running line and a trained team rather than separate components to integrate alone.
3스테이션 원스텝 IBM 공정은 플래시와 후처리를 어떻게 방지하나요?
The parison is injected onto a core rod in the injection station, rotated to the blow station where it is inflated against a cold blow mold, then rotated to the ejection station. Because the bottle is formed inside a closed mold with no cutoff scrap, there is no flash and no deflashing or trimming step is required, which removes a whole downstream operation and its quality risk.
소형 의료 및 화장품 병에 어떤 Aibim 모델을 선택해야 합니까?
For containers from 3 ml to 250 ml in PP, PE, PS, PETG or clear styrenic resin, the IBM55 Hybrid Electric is the recommended platform thanks to its precision and energy efficiency. For 15 ml to 500 ml volumes and higher cavitation, the IBM65 is the better fit, while the IBM75 covers 50 ml to 1000 ml wide-mouth and high-output jobs.
Aibim 기계는 PET와 바이오 기반 PLA를 가공할 수 있나요?
Yes. Aibim machines are built as I(S)BM units, meaning they support injection stretch blow molding. PET is processed with in-line stretch for biaxial orientation and must be dried to below 50 ppm at a dew point of -40 degrees C. PLA is processed with careful temperature and drying control to avoid thermal degradation, and both reward a clean, low-shear barrel profile.
라인이 양산 준비가 되었음을 확인하는 승인 기준은 무엇입니까?
Acceptance is confirmed through factory acceptance testing and site acceptance testing: a continuous run of several hours at the agreed cavitation, a defined good-bottle rate, cycle time within tolerance, tight bottle-weight standard deviation, clean visual appearance, and measured noise and energy consumption. The same criteria are checked at both gates for consistency.
턴키 IBM 프로젝트는 계약부터 양산까지 얼마나 걸립니까?
A typical project runs from contract signature through manufacturing, factory acceptance, shipment, installation, training and into mass production. The machine-build window is usually several weeks, with shipment, installation and training adding further weeks depending on destination and customization scope. The exact gantt is confirmed in the project plan.
금형을 기계와 별도로 조달해야 하나요?
No. In the Aibim turnkey scope the preform mold, blow mold, and core rods are designed and built as a matched set and validated together on the machine during factory acceptance. Sourcing them together is what guarantees the neck transfer, cooling balance, and wall distribution are optimized as one system rather than bolted from mismatched suppliers.
결론
A full turnkey IBM solution from Aibim, a Wanplas factory, is the most direct path from a bottle concept to a validated, running production line. It bundles the IBM machine, the matched mold set, the auxiliary equipment, a material-specific process formula, structured operator training, on-site installation, and documented acceptance into a single accountable deliverable. With 12+ years of plastic machinery experience, its own CNC machining center, a new factory opened in 2022, and an annual capacity above 100 lines, Aibim builds the IBM75, IBM65, and IBM55 Hybrid Electric platforms that cover containers from 3 ml to 1000 ml across pharmaceutical, food, drink, and cosmetic applications.
The three-station one-step process gives these lines a built-in advantage for small, neck-critical bottles: precision molded necks, no flash, and no trimming step. The formula pack and training turn that hardware into capability, and the Wanplas group service promises, including USD 500 free parts per year and open-factory visits, protect the investment long after commissioning. For a buyer evaluating suppliers, the practical next step is to share the bottle drawing, target output, and material so Aibim can confirm the right model, cavitation, and acceptance criteria. We welcome you to send your product specifications for a tailored configuration, to visit our factory to see the lines running, and to request a sample trial run on your resin before you commit.






