Máquina de moldeo por inyección y soplado

Solución IBM totalmente llave en mano: incluye equipos, moldes, fórmula y capacitación de operadores

Qué significa una solución IBM totalmente llave en mano

A full turnkey IBM solution is more than a single injection blow molding machine sitting on a truck. It is a complete, production-ready system that hands the buyer a running line rather than a collection of loose components. Aibim, a Wanplas factory with 12+ years of experience in plastic machinery manufacturing, positions the turnkey offer as the fastest and lowest-risk route from a product concept to commercial bottles. With its own CNC machining center, a new factory purchased in 2022, and an annual production capacity of more than 100 lines, Aibim treats the turnkey package as a single accountable deliverable: one supplier, one responsibility boundary, one acceptance point.

The core idea of turnkey delivery is accountability. When a buyer sources the machine from one vendor, the mold from another, the auxiliary equipment from a third, and the process know-how from somewhere else, every interface becomes a finger-pointing opportunity the first time a bottle comes out with a defect. Aibim closes those gaps by bundling the host machine, the full mold set, the validated process formula, the auxiliary equipment, the training, the installation, and the acceptance testing into one scope. The buyer receives a line that has already produced good bottles under agreed conditions before it leaves the factory, and a team that knows how to run it after it arrives.

This article explains every element of that bundle. It covers the three-station one-step injection blow molding principle, the real Aibim machine series and their specifications, the mold design rules, the material-specific formula pack, the operator training system, the installation and acceptance workflow, defect troubleshooting, capacity planning, model selection, application industries, and the service commitments that protect the investment. By the end, a procurement or engineering manager should be able to scope a project, brief a team, and evaluate a supplier proposal with confidence.

Alcance de la entrega llave en mano de un vistazo

La tabla siguiente define exactamente qué incluye un paquete IBM llave en mano estándar de Aibim, qué se ofrece como opción y qué sigue siendo responsabilidad del cliente. El límite se declara de antemano para que la planificación del proyecto, la preparación de servicios públicos y la asignación del presupuesto sean inequívocas.

Scope Item Included Optional Customer-Supplied
IBM host machine (injection + blow + ejection) Yes Higher cavitation variants —
Preform mold (injection cavity block) Yes Spare cavity set —
Blow mold (bottle forming cavity) Yes Multi-cavity upgrade —
Core rods (transfer mandrels) Yes, full set + spares Coated upgrade —
Hopper dryer / dehumidifying dryer Yes Central drying —
Vacuum loader / feeder Yes Central feeding —
Mold temperature controller Yes Oil unit for high temp —
Industrial water chiller Yes Larger capacity —
Blow air compressor Optional Oil-free high-pressure Often customer-supplied
Conveyor and bottle collector Yes Inline inspection —
Fórmula de proceso y paquete de parámetros Yes Color masterbatch tuning —
Operator training program Yes Extended on-site —
Installation and commissioning Yes (engineer on-site) Remote-first option Foundations, utilities
Acceptance testing (FAT and SAT) Yes Third-party witness —
First-year spare parts support Yes (USD 500 free parts/year) Extended kit —

The boundary between “optional” and “customer-supplied” is the most important planning item. Aibim typically supplies the blow air compressor as an option rather than standard, because many factories already operate a plant air system; the buyer should confirm available pressure and flow before contract signature so the line is not delayed by a missing utility.

Cómo funciona el proceso IBM de un paso y tres estaciones

Injection blow molding is a one-step, three-station process that combines injection molding and blow molding into a single closed loop on one machine. The defining feature is the core rod, a precision mandrel onto which the parison is injected and on which the parison travels between stations. Because the bottle is formed entirely inside steel cavities, the process produces containers with excellent neck finish accuracy, tight dimensional control, and no flash that would require trimming. This is the central reason pharmaceutical, cosmetic, and food brands choose IBM over processes that leave a scrap tail.

Estación de inyección: formación de la preforma (parison)

In the first station, the injection unit plasticizes the resin in the barrel and injects it into the preform mold around the core rod. The preform mold shapes the neck finish, the thread, and the tamper-evident band with full steel-surface fidelity, while the body is formed as a thick-walled parison sized to be blown out later. The core rod acts as the internal cavity for the parison interior and as the transfer device between stations. Gate design here determines where the material enters and whether a cold slug or needle-valve cut is used. Because the neck is molded, not cut or welded, its geometry is reproducible bottle after bottle.

Estación de soplado: Formación de la botella por inflado

After the injection station, the rotating table indexes the core rod (still carrying the warm parison) to the blow station. Here the parison is inflated against the cooled blow mold cavity by compressed air at a typical pressure between 0.6 MPa and 1.0 MPa. For machines configured as injection stretch blow molding, a stretch rod extends to orient the polymer biaxially, which improves clarity, barrier, and top-load for materials such as PET. The bottle cools against the steel wall and sets to the final shape. There is no scrap, no cutoff, and no post-mold trimming step.

Estación de expulsión: Desmoldeo y descarga

The third station receives the finished bottle on the core rod and strips it off, usually by an air-assisted stripper or mechanical take-off, then drops or conveys it to the collection point. Aibim machines use a stripper station with a long-distance digital laser sensor for mold safety and a light curtain for personal safety, consistent with CE certification requirements. The empty core rod returns to the injection station and the cycle repeats. One rotation of the indexing table produces one finished bottle per cavity per cycle.

Por qué la precisión del cuello supera al moldeo por extrusión y soplado

In extrusion blow molding, the parison is extruded from a die head and pinched at the base, which leaves a weld line and a tail that must be removed by deflashing. The neck is formed by a blow pin rather than a steel cavity, so thread accuracy and sealing consistency are harder to control. By contrast, IBM molds the neck as a precision injection-molded feature, giving pharmaceutical and cosmetic customers a container whose cap seals predictably on every unit. For tamper-evident and child-resistant closures, that repeatability is not a luxury; it is a compliance requirement.

Serie de máquinas Aibim para proyectos llave en mano

Aibim builds three core platforms for the turnkey IBM program: the IBM75, the IBM65, and the IBM55 Hybrid Electric. All three are three-station, one-step machines covering containers from 3 ml to 1000 ml. The IBM75 is the high-output, large-format platform; the IBM65 is the mid-range workhorse; and the IBM55 Hybrid Electric is the compact, energy-efficient platform for small medical, cosmetic, and oral-care bottles. The specifications below are typical values for standard configurations and will be confirmed against the exact mold and material in the project quotation.

Máquina de moldeo por inyección y soplado IBM75

The IBM75 is the largest standard platform in the Aibim range, built for containers from 50 ml to 1000 ml and for high cavitation where output matters more than floor-space economy. Its single-crossbeam, double-pole clamping framework enlarges the mold-setting space and stabilizes the platen during high-speed cycling. With PREFILL technology and a variable-displacement pump in the hydraulic system, it saves a meaningful share of energy compared with conventional hydraulic machines, while the SD-card parameter storage lets recipes be saved and re-installed across multiple machines.

Parameter IBM75 Typical Value
Fuerza de cierre75 ton (approximately 750 kN)
Screw diameter45 mm
Shot size (max)approximately 270 cm³ / 245 g (PP)
Cavity number range2 to 12
Product volume range50 ml to 1000 ml
Installed powerapproximately 38 kW
Cycle time10 to 14 seconds
Machine dimensions (L x W x H)4.3 x 1.6 x 2.3 meters
Peso de la máquinaapproximately 9.8 ton

Máquina de moldeo por inyección y soplado IBM65

The IBM65 is the balanced mid-size platform, covering 15 ml to 500 ml containers with flexible cavitation for both pharmaceutical and cosmetic runs. It shares the same clamping framework philosophy as the IBM75 and the same PREFILL hydraulics, making it a common choice when a plant needs one machine that can serve several product families. The wider useful cavity range lets a buyer standardize on a single model for most of the catalog.

Parameter IBM65 Typical Value
Fuerza de cierre65 ton (approximately 650 kN)
Screw diameter40 mm
Shot size (max)approximately 190 cm³ / 172 g (PP)
Cavity number range2 to 10
Product volume range15 ml to 500 ml
Installed powerapproximately 30 kW
Cycle time9 to 12 seconds
Machine dimensions (L x W x H)3.9 x 1.45 x 2.2 meters
Peso de la máquinaapproximately 7.6 ton

Máquina de moldeo por inyección y soplado IBM55 híbrida eléctrica

The IBM55 Hybrid Electric is the compact platform for small containers from 3 ml to 250 ml, where precision and energy efficiency matter more than maximum cavitation. The hybrid electric drive reduces installed power and stabilizes repeatability, which is valuable for low-volume, high-value medical and cosmetic items where color and dimension consistency are scrutinized. It is the natural starting point for a new entrant that wants a turnkey line without committing to the footprint and power of the larger platforms.

Parameter IBM55 Hybrid Typical Value
Fuerza de cierre55 ton (approximately 550 kN)
Screw diameter35 mm
Shot size (max)approximately 130 cm³ / 118 g (PP)
Cavity number range2 to 8
Product volume range3 ml to 250 ml
Installed powerapproximately 22 kW (hybrid servo)
Cycle time8 to 11 seconds
Machine dimensions (L x W x H)3.5 x 1.35 x 2.05 meters
Peso de la máquinaapproximately 6.2 ton

Las tres plataformas están diseñadas y fabricadas con el propio centro CNC de Aibim, lo que acorta el plazo de entrega de los repuestos y permite un control estricto de los componentes de precisión que determinan la calidad de la botella. La nueva fábrica de 2022 amplía esta capacidad a más de 100 líneas por año.

Diseño de moldes y paquete de utillaje

The mold set is the heart of any IBM turnkey project. It consists of three coordinated components: the preform mold that shapes the parison and neck on the core rod, the blow mold that forms the final bottle, and the core rods that carry the parison between stations. Aibim designs and builds these as a matched set so that the neck transfer, cooling balance, and wall distribution are optimized together rather than bolted together from mismatched sources.

Diseño y recubrimiento del vástago central

The core rod is the most stressed and most critical tooling element. It must withstand repeated thermal cycling, injection pressure, and the mechanical force of stripping the finished bottle. Core rods are typically made from a through-hardened hot-work steel and finished to a fine surface so the bottle interior releases cleanly. For sticky or clear materials, a hard functional coating reduces adhesion and extends the interval between maintenance sessions. Because the core rod defines the internal shape and the neck bore, its dimensional stability directly controls whether caps seat correctly.

Sistema de compuerta y canal de la preforma

The preform mold uses either a needle-valve hot runner or a cold runner. A needle-valve hot runner gives a clean gate with minimal vestige and is preferred for cosmetic and medical bottles where any gate blemish is unacceptable. A cold runner is simpler and lower cost but leaves a small cold slug that must be managed. Cavity count and balanced runner layout decide whether every preform fills at the same pressure and temperature; an unbalanced runner produces cavitation-to-cavitation weight variation that shows up later as bottle-weight standard deviation. Aibim balances the runner hydraulically and thermally during mold validation.

Rosca del cuello, banda de inviolabilidad, ventilación y enfriamiento

The neck thread and tamper-evident band are formed in the preform mold with full steel fidelity, which is why IBM neck quality is superior to cut-neck processes. Venting must be placed so air escapes as the parison forms; poor venting causes short shots and burn marks at the neck. Cooling is decisive: the blow mold is water-cooled, and the core rod has internal cooling channels that pull heat from the parison interior. Balanced cooling shortens the cycle and reduces residual stress that can cause post-mold warpage. Mold steel is selected by duty: pre-hardened mold steel for general cavities, stainless grades for corrosive or medical applications, and hardened hot-work steel for core rods.

Vida útil del molde e intervalo de mantenimiento

Mold life depends on material abrasiveness, runner type, and maintenance discipline. A well-maintained preform and blow mold set will run for a very large number of cycles before rework. The practical limit is usually surface wear and dimensional drift rather than sudden failure. Aibim supplies a maintenance schedule as part of the turnkey package: routine cleaning, core rod inspection, gate tip checks, and cooling-channel descaling at defined intervals. Keeping to that schedule is the single biggest factor in holding bottle-weight consistency over years of production.

Fórmula de proceso y paquete de parámetros

A process formula is the complete set of machine settings that reliably makes a good bottle from a specific resin. Delivering it as part of the turnkey package means the buyer does not start from a blank screen. Aibim provides a validated starting recipe for the contracted material, tuned on the actual mold during factory acceptance, and stored on the SD card for re-installation. The table below gives representative parameter windows for the main IBM materials; the final values are optimized per mold and confirmed during acceptance.

Requisitos de secado específicos del material

Hygroscopic materials must be dried before they enter the barrel, because moisture turns to steam in the melt and causes splay, hazing, and weak neck definition. PET is the strictest case: it must be dried to below 50 ppm moisture at a dew point of -40 degrees C, typically for four to six hours, before stretch blow. PETG, PLA, and some clear styrenic resins also need desiccant drying, while PP and PE are essentially non-hygroscopic and need only hopper warming to drive off surface moisture. The formula pack states the exact dryer setpoint and residence time for the contracted resin.

Material Barrel Temp (feed to front, C) Melt Temp (C) Injection Pressure (MPa) Holding Pressure (MPa) Cooling Time (s) Blow Pressure (MPa) Drying Requirement
PP 200 / 220 / 230 / 240 230 to 250 80 to 120 40 to 70 4 to 8 0.7 to 0.9 Hopper warm, 80 C, 2 h (optional)
HDPE / LDPE 160 / 180 / 200 / 210 200 to 220 70 to 110 35 to 60 5 to 9 0.6 to 0.8 Not required
PET (via stretch) 260 / 270 / 280 / 285 270 to 285 90 to 130 50 to 80 3 to 6 0.8 to 1.0 Dew point -40 C, below 50 ppm, 4 to 6 h
PETG / PCTG 220 / 230 / 240 / 245 230 to 250 80 to 120 40 to 70 4 to 7 0.7 to 0.9 65 C, 3 to 4 h, dew point -40 C
PS 180 / 200 / 210 / 220 200 to 230 70 to 110 35 to 60 4 to 7 0.6 to 0.8 70 C, 1 to 2 h (optional)
PLA (bio-based) 170 / 180 / 190 / 195 185 to 205 60 to 100 30 to 55 4 to 8 0.6 to 0.8 80 C, 3 to 4 h, dew point -40 C, below 250 ppm

These windows are starting points, not final recipes. The barrel profile, injection speed, and holding pressure are fine-tuned during factory acceptance against the real mold so the buyer receives numbers that already produce good bottles. Saving those numbers to the SD card means a second identical machine can be brought online with the same recipe in minutes.

Adaptación de materiales para aplicaciones reguladas

Injection blow molding serves markets where material purity and consistency are regulated, not optional. The turnkey formula pack is therefore written around the behavior of each resin family and the cleanliness the application demands. Aibim machines process PE, PP, PS, ABS, SAN, clear styrenic resin, PC, PETG/PCTG, and, in stretch configuration, PET and bio-based PLA.

PP de grado médico y resina estirénica transparente

Medical and pharmaceutical bottles are most often made from medical-grade PP with a melt flow rate in the range of 20 to 40 g per 10 minutes, which balances flow for thin necks with enough stiffness for the body. Clear styrenic resin (often called K-resin in the trade) is used where glass-like clarity is needed for unit-dose and diagnostic vials, though it is softer and less chemical-resistant than PP. For containers that contact the body or medication, biocompatibility is documented against USP Class VI and ISO 10993 as applicable; the resin supplier provides the official test data and the molder maintains a clean, controlled process so extractables stay within the validated envelope.

PET y PETG mediante soplado por estiramiento

PET is processed on Aibim I(S)BM machines with in-line stretch, which orients the polymer and yields clear, strong bottles suitable for water, beverage, and some pharmaceutical applications. The intrinsic viscosity is typically in the range of 0.72 to 0.84 dL/g; outside that window the stretch behavior and bottle properties shift. PETG and its copolymer PCTG are processed without stretch for clarity and impact, useful for cosmetic and diagnostic packaging where a glossy, amorphous look is wanted. Both require strict drying, and both reward a clean, low-shear barrel profile that avoids thermal degradation.

Limpieza, extraíbles y cumplimiento

For pharmaceutical and food contact, the documented chain is resin certification, clean conveyance, controlled drying, and a validated process with minimal residence time at temperature. The buyer should request the resin’s food-contact and biocompatibility documentation and confirm the local regulatory framework, because the machine maker supplies the process, not the regulatory certificate. Aibim supports this by keeping the material path clean, avoiding unnecessary shear, and documenting the process window that was accepted during factory testing.

Sistema de formación de operadores

A line is only as good as the people who run it. The turnkey package includes a structured operator training program so the buyer’s team can start production confidently and maintain quality without depending on the supplier for every adjustment. Training is modular, hands-on, and assessed, and it is delivered both at the factory during acceptance and on-site during commissioning.

Training Module Duration Assessment Method Target Position
Safety and lockout procedure0.5 dayWritten quiz + demonstrationAll operators
Start-up and shut-down SOP0.5 daySupervised runLine operator
Parameter adjustment and recipe call-up1 dayPractical test on live machineSenior operator
Mold change and color change1 dayTimed changeoverMold technician
Daily maintenance and lubrication0.5 dayChecklist auditMaintenance staff
Fault diagnosis and troubleshooting1 dayScenario drillSenior operator / technician
Quality judgment and sampling0.5 dayDefect identification testQC inspector

El programa totaliza aproximadamente cinco días de instrucción combinada, ampliados o reducidos según el plan de personal del comprador. Cada aprendiz recibe los procedimientos operativos estándar por escrito, y la receta utilizada para la aceptación se documenta para que el equipo pueda reproducir la ventana validada sin conjeturas.

Flujo de trabajo de instalación y puesta en marcha

La instalación y la puesta en marcha convierten una máquina enviada en una línea en funcionamiento. Aibim envía a un ingeniero para el trabajo in situ, y el comprador prepara la cimentación, la energía, el agua, el aire y el drenaje con antelación para que la ventana no se pierda por brechas de servicios. La secuencia siguiente es el flujo llave en mano estándar.

  1. Aceptación de llegada. Verifique el envío contra la lista de empaque, inspeccione los daños de tránsito y confirme que los artículos del alcance estén presentes.
  2. Posicionamiento y nivelación. Coloque la máquina sobre la base preparada y nivele el bastidor para que la mesa indexadora gire correctamente.
  3. Conexión de servicios públicos. Conecte la energía, el agua de enfriamiento, el aire de planta y cualquier desagüe según el programa de servicios públicos suministrado. (La energía dedicada del taller, el área de piso y el plan de entorno para esta línea se manejan como un tema de preparación separado y más ligero y solo se resumen brevemente aquí.)
  4. Funcionamiento en vacío. Haga funcionar la máquina sin moldes para verificar el movimiento, los dispositivos de seguridad y la lógica de control.
  5. Prueba con moldes. Monte el molde de preformas, el molde de soplado y las varillas del núcleo, y luego opere con material para confirmar el llenado y el soplado.
  6. Confirmación de la primera pieza. Inspeccione las primeras botellas en cuanto a cuello, pared, peso y apariencia según el dibujo.
  7. Aceptación de funcionamiento continuo. Ejecute el número acordado de ciclos y registre la producción, la tasa de piezas buenas y la estabilidad.
  8. Aprobación de capacidad y rendimiento. Confirme que la línea cumple los objetivos contratados de cavitación, ciclo y botellas buenas, y luego entregue.

Este flujo de trabajo se replica en la fábrica durante la FAT, de modo que para cuando la máquina llega al piso del comprador, el proceso ya está probado y el paso en sitio es verificación en lugar de descubrimiento.

Normas de aceptación en fábrica y en sitio

La aceptación es donde se mide la promesa llave en mano. Aibim aplica dos puertas: la prueba de aceptación en fábrica en la planta de Aibim antes del envío, y la prueba de aceptación en sitio después de la instalación en la planta del comprador. Los criterios se acuerdan en el contrato y se registran en un informe firmado por ambas partes.

Acceptance Metric Typical Target How It Is Measured
Continuous run durationSeveral hours at contracted cavitationTimed production log
Good-bottle rateHigh, contract-defined percentageSampled inspection
Cycle time attainmentWithin agreed toleranceCycle counter over the run
Bottle-weight standard deviationTight, cavity-to-cavityWeighing sampled bottles
Visual appearanceNo flash, no haze, clean neckVisual and gauge check
Noise and energyWithin declared envelopeSound meter and power meter

Debido a que los mismos criterios se comprueban tanto en la FAT como en la SAT, una prueba de fábrica superada es un fuerte indicador de una prueba en sitio sin contratiempos. El informe también se convierte en la referencia para el mantenimiento futuro: si el peso de la botella comienza a desviarse, el estándar de aceptación indica al equipo cómo era el buen resultado.

Defectos comunes y contramedidas

Incluso un proceso validado puede desviarse, y la formación de los operadores cubre cómo leer las señales tempranas. La tabla siguiente relaciona los defectos de IBM más comunes con sus causas probables y la primera acción correctiva, de modo que una línea pueda recuperarse rápidamente sin necesidad de una llamada de servicio.

Defect Likely Cause Countermeasure
Neck flash or finWorn neck cavity, excess injection pressureInspect and refurbish cavity; lower injection pressure
Core rod stickingResin buildup, poor coating, insufficient coolingClean rod, check coating, raise internal cooling
Variación del espesor de paredUnbalanced runner, off-center parisonRebalance runner, check core rod alignment
Bottle hazeMoisture, overheat, degraded resinVerify drying, lower melt temp, shorten residence
Sink markInsufficient holding, hot local sectionRaise holding pressure or time, improve cooling
Bottom pinholeTrapped gas, contamination, thin baseImprove venting, clean resin, adjust parison
Ejection difficultyUnder-cooled bottle, stripped too earlyExtend cooling, verify stripper timing
Color differenceMasterbatch letdown drift, batch changeStandardize let-down, re-confirm recipe

La mayoría de estos defectos se remontan a tres variables: balance de temperatura, tiempo de enfriamiento y condición de la resina. El paquete de fórmulas establece la ventana probada, y la capacitación enseña a los operadores a mover una variable a la vez en lugar de perseguir el síntoma.

Cálculo de capacidad y planificación de producción

Capacity is the product of cycle time, cavity count, and effective operating hours, discounted by the real-world efficiency known as overall equipment effectiveness. A simple planning formula is: bottles per hour equals cavities multiplied by 3600 divided by cycle time in seconds. Effective output then applies the operating hours and an efficiency factor that accounts for changeovers, minor stops, and planned maintenance.

Model Cavities Cycle (s) Bottles / Hour Per 8h Shift Per Month (2 shifts, 25 days)
IBM75812240019200960000
IBM65611196315709785450
IBM55 Hybrid410144011520576000

The monthly figures above are theoretical maxima at continuous running. In practice, overall equipment effectiveness of 75 to 85 percent is a realistic planning assumption once changeovers, start-up loss, and scheduled maintenance are included. Changeover time between products is a major lever: a faster, better-documented mold change directly raises effective output more than a slightly shorter cycle. That is why the training program drills timed changeovers and why the SD-card recipe storage matters for repeatability.

Guía de selección: haga coincidir su producto con un modelo Aibim

Elegir el modelo correcto comienza desde el producto, no desde la máquina. El volumen, la producción objetivo, el material y la cavitación apuntan juntos a una plataforma Aibim. La tabla siguiente es una ayuda de planificación; la recomendación final es confirmada por la ingeniería de Aibim contra el dibujo real de la botella y la resina.

Product Volume Target Output Material Cavity Range Recommended Aibim Model
3 to 30 mlMedium to highPP, PE, PS, clear styrenic2 to 8IBM55 Hybrid Electric
15 to 150 mlMedium to highPETG, PET (stretch), PP2 to 10IBM65
150 to 500 mlMediumPP, HDPE, PETG2 to 10IBM65 or IBM75
500 to 1000 mlHighHDPE, PP, wide-mouth2 to 12IBM75
Cosmetic vial, any small sizeFlexiblePETG, clear styrenic, PP2 to 8IBM55 Hybrid or IBM65
Pharma pill or oral bottleMedium to highPP, HDPE2 to 12IBM65 or IBM75

When output is the dominant constraint, move up a platform and add cavities; when precision and energy are dominant, the IBM55 Hybrid is usually the right answer even at lower volume. Aibim engineers will confirm the exact cavitation that fits the platen and shot size so the quoted cycle is achievable.

Industrias de aplicación y productos finales

Aibim’s turnkey IBM lines serve applications where the neck, hygiene, and appearance of a small container decide product quality. The real application fields built into the Aibim program are pharmaceuticals, food, drink, and cosmetics, and they translate into concrete end products that buyers recognize immediately.

In pharmaceuticals, the lines make medicine bottles, oral liquid bottles for syrup and suspension, and eye drop bottles where a precise dropper neck is essential. In health products, they make supplement and vitamin bottles in the 50 ml to 250 ml range with tamper-evident necks. In cosmetics, they make small mascara, lip gloss, serum, and sample vials where clarity and a clean neck sell the brand on the shelf. In daily chemical packaging, they make travel-size shampoo, conditioner, and lotion bottles, plus single-use sachet-style mini bottles for hotels and airlines. In food and drink, they make unit-dose and condiment bottles where a tight-sealing neck protects flavor and prevents leakage.

El hilo común es el envase pequeño con un cuello exigente. Esa es exactamente la geometría que la IBM produce mejor, y es por eso que una línea IBM llave en mano es a menudo la ruta más económica hacia botellas de grado farmacéutico y cosmético en comparación con procesos que requieren recorte e inspección posteriores.

Compromisos de servicio y soporte

La relación llave en mano no termina en el envío. Como fábrica de Wanplas, Aibim aplica las promesas de servicio compartido del grupo, y el paquete del proyecto está respaldado por compromisos específicos y documentados que protegen el tiempo de actividad y la producción del comprador.

  • Pruebas antes del envío. Cada línea pasa las pruebas de aceptación en fábrica con el molde y el material contratados antes de salir de la planta, con un informe registrado.
  • Instalación y puesta en marcha. Los ingenieros de Aibim viajan al sitio del comprador para instalar, alinear, conectar los servicios y operar la línea hasta el estándar de aceptación.
  • Piezas de repuesto. El primer año incluye USD 500 en piezas gratuitas por año, y la garantía cubre el reemplazo gratuito de piezas dañadas dentro del período de garantía.
  • Formación. El programa modular de formación de operadores se imparte en la fábrica e in situ, con procedimientos escritos y la receta validada.
  • Operación y mantenimiento remotos. El sistema de control soporta monitoreo remoto y respaldo de parámetros, y el almacenamiento de recetas en tarjeta SD permite compartir ajustes entre máquinas; los ingenieros pueden revisar los datos del proceso remotamente para acortar el diagnóstico de fallas.
  • Fábrica abierta. Aibim da la bienvenida a las visitas de clientes a la planta de Zhangjiagang para inspeccionar la fabricación, el centro CNC y las líneas de muestra en funcionamiento antes y después de la compra.

These commitments are part of the Wanplas brand-level promise to its customers: free parts, transport guarantee, production capacity guarantee, and quality standards. For a turnkey buyer, they mean one accountable partner from contract to commercial production and through the first year of operation.

Resumen del cronograma del proyecto

A turnkey project is a sequence of staged gates, each with its own duration. The table below is a typical gantt-style view in weeks; exact durations shift with customization, mold complexity, and destination. No monetary amounts are shown because the engagement is scoped by configuration, not by a single published price.

Stage Typical Duration (weeks) Key Output
Contract and specification1Locked scope and acceptance criteria
Manufacturing and mold build8 to 12Machine and matched mold set
Factory acceptance testing1Validated recipe and report
Shipment2 to 5 by regionDelivered to site
Installation and commissioning1 to 2Line running on-site
Operator training1Certified operators
Mass productionOngoingCommercial output

Relative investment level for the complete turnkey package rises from Low for a basic IBM55 single-cavity starter line, through Medium for a standard multi-cavity IBM65, to High for a high-cavitation IBM75, and Very High or Premium for fully customized multi-cavity medical-grade lines with extended validation. The right level is set by the product and the regulatory load, not by a fixed list price.

Preguntas frecuentes

¿Qué incluye exactamente una solución IBM llave en mano completa de Aibim?

A full turnkey package covers the injection blow molding machine, the complete mold set (preform mold, blow mold and core rods), auxiliary equipment, a validated process formula and parameter pack, operator training, on-site installation and commissioning, acceptance testing, and the first year of spare parts support. The buyer receives a running line and a trained team rather than separate components to integrate alone.

¿Cómo evita el proceso IBM de una etapa y tres estaciones la rebaba y el postprocesamiento?

The parison is injected onto a core rod in the injection station, rotated to the blow station where it is inflated against a cold blow mold, then rotated to the ejection station. Because the bottle is formed inside a closed mold with no cutoff scrap, there is no flash and no deflashing or trimming step is required, which removes a whole downstream operation and its quality risk.

¿Qué modelo de Aibim debería elegir para botellas médicas y cosméticas pequeñas?

For containers from 3 ml to 250 ml in PP, PE, PS, PETG or clear styrenic resin, the IBM55 Hybrid Electric is the recommended platform thanks to its precision and energy efficiency. For 15 ml to 500 ml volumes and higher cavitation, the IBM65 is the better fit, while the IBM75 covers 50 ml to 1000 ml wide-mouth and high-output jobs.

¿Pueden las máquinas de Aibim procesar PET y PLA de base biológica?

Yes. Aibim machines are built as I(S)BM units, meaning they support injection stretch blow molding. PET is processed with in-line stretch for biaxial orientation and must be dried to below 50 ppm at a dew point of -40 degrees C. PLA is processed with careful temperature and drying control to avoid thermal degradation, and both reward a clean, low-shear barrel profile.

¿Qué estándares de aceptación confirman que la línea está lista para la producción en masa?

Acceptance is confirmed through factory acceptance testing and site acceptance testing: a continuous run of several hours at the agreed cavitation, a defined good-bottle rate, cycle time within tolerance, tight bottle-weight standard deviation, clean visual appearance, and measured noise and energy consumption. The same criteria are checked at both gates for consistency.

¿Cuánto tarda un proyecto IBM llave en mano desde el contrato hasta la producción en masa?

A typical project runs from contract signature through manufacturing, factory acceptance, shipment, installation, training and into mass production. The machine-build window is usually several weeks, with shipment, installation and training adding further weeks depending on destination and customization scope. The exact gantt is confirmed in the project plan.

¿Necesito adquirir el molde por separado de la máquina?

No. In the Aibim turnkey scope the preform mold, blow mold, and core rods are designed and built as a matched set and validated together on the machine during factory acceptance. Sourcing them together is what guarantees the neck transfer, cooling balance, and wall distribution are optimized as one system rather than bolted from mismatched suppliers.

Conclusión

A full turnkey IBM solution from Aibim, a Wanplas factory, is the most direct path from a bottle concept to a validated, running production line. It bundles the IBM machine, the matched mold set, the auxiliary equipment, a material-specific process formula, structured operator training, on-site installation, and documented acceptance into a single accountable deliverable. With 12+ years of plastic machinery experience, its own CNC machining center, a new factory opened in 2022, and an annual capacity above 100 lines, Aibim builds the IBM75, IBM65, and IBM55 Hybrid Electric platforms that cover containers from 3 ml to 1000 ml across pharmaceutical, food, drink, and cosmetic applications.

The three-station one-step process gives these lines a built-in advantage for small, neck-critical bottles: precision molded necks, no flash, and no trimming step. The formula pack and training turn that hardware into capability, and the Wanplas group service promises, including USD 500 free parts per year and open-factory visits, protect the investment long after commissioning. For a buyer evaluating suppliers, the practical next step is to share the bottle drawing, target output, and material so Aibim can confirm the right model, cavitation, and acceptance criteria. We welcome you to send your product specifications for a tailored configuration, to visit our factory to see the lines running, and to request a sample trial run on your resin before you commit.